Our engineers and technicians have years of industry experience for developing a qualitative range of Shot Blasting Machine. Under the stern guidance of our team, this system is manufactured with use of the finest quality materials. This is used to clean, strengthen (peen) or polish metal. It has applications in almost every industry that uses metal, including aerospace, automotive, construction, foundry, shipbuilding, rail, and many others. As per the variegated needs of our clients, we provide this Shot Blasting Machine at pocket-friendly prices.
Geyser tanks are loaded on reverse side with neck opening downward, on rotating work stations. A lance tool with blasting nozzle cleans the tank, reciprocating up- down. The abrasive comes back in the pressure generator for recycling. Tanks get cleaned while rotating.
It is fabricated with 3.15 mm sheet with suitable supports to give strength and rigidity. A front side door is provided with vision window with Glass is provided. Suitable lighting is provided in the cabinet. Ca
Cabinet Size : 1200mm x 1000mm x 1000mm
One Front door Hinge Type with Vision Window will be provided.
Vision Window : Qty: 1 Nos.
Vision glass is protected by fine wire mesh screen against abrasion and is toughened and is replaceable.
Location : At front Side.
Width : 275 mm.
Height : 535 mm.
Illumination : Qty: 1 Nos.
One No. Light Box mounted on top of the cabinet. The Light box glass is protected by fine wire mesh screen against abrasion and is replaceable.
Turn Table : Job Handling System
One nos. rotating work stations are provided for Blasting of the tanks. However suitable fixture for One jobs will be provided free of cost with the machine.
Turn Table Drive : 0.5 H.P Gear Box & Electric Motor
Drive Belt Type : Double âVâ Belt
Dia. of Turn Table : 300 mm
Blasting Nozzle Reciprocation System (Lance Nozzle Type)
A Chain Sprocket type mechanical Lance Reciprocation is provided. The Trolley Moving Trolley is conveyed by the movement of gear box/motor. Trolley consists of Linear Notion bearing which moves on Hardened Shafts. Two nos. lance tools are mounted on trolley for internal blasting of tanks, which reciprocates vertically up- down. The Reciprocation arrangement will be kept under the cabinet hopper in a pit, pit is in buyerâs scope.
Type of Reciprocation : Mechanical/Chain Sprocket Type
Stroke Length : 650mm Adjustable by Limit Switches
Nozzle vertical movement Drive : 0.5 H.P Gear Box & Electric Motor with AC Drive & Encoder
Nozzle Size : 6mm SPL Angular Type
Blasting Hose : 3/4" ID Hose
Nozzle Mounting Trolley : Sliding Trolley with Linear Motion Bearing on Hardened Shafts
Pressure Generator Unit
It Consist of pressure vessel [blast generator], a mushroom valve, a mixing tube. Pneumatic Operated pinch valve and automatic exhaust valve to depressurize the pressure vessel, when air supply is cut off. Pressure vessel is fabricated from 6 mm thick MS Plates as per IS-2825 and hydraulically tested at 250 psi. A Vibratory Sieve will also be provided above pressure tank to avoid falling other big size media/parts into the tank. The Blast Generator will be kept under the cabinet hopper in a pit, pit is in buyerâs scope.
Blast Generator Capacity : 3 CFT
Pinch Valve : Pneumatic Operated 1Nos.
Mixing Tube : 1Nos.
Capacity of Fan : 600 CFM
Motor : 1.5 H.P.
No. of bags : 16Nos.
Bag cleaning : Through Manual Shaking
Control Panel with PLC
Control Panel is provided at a side of the cabinet, it houses all the controls for Main On/Off Switch, Turn tables, Dust collector, Blasting On/Off, Blast gun movements etc. Ampere, Volt meter, Overload relay, Emergency stop are also provided.
PLC will be provided for Operational Sequence & Parameter Sequence to control repeatability of the process and fault findings. Gun Reciprocation stroke & speed are controlled as per selected job code. Nine(9) Job codes will be provided in HMI for different job size.